Bobbins and Shuttle Case vs P369 Presser Foot
Shopping for presser feet, notions & threading often comes down to one practical question: do you need machine hardware for a Singer Treadle setup, or a specialized foot for decorative sewing? These two sets serve different tasks, so the right choice depends more on the project than on the package count. The Singer set is built around bobbins and a shuttle case, while the P369 set focuses on bead and sequin work.
Quick verdict
Choose Bobbins and Sewing Machine Shuttle Case for Singer Treadle Machines, 11 Pcs Set when replacement bobbins and a shuttle case are the priority. Choose 3Pcs P369 New Bead Sequin Special Presser Foot for decorative stitching that needs a dedicated presser foot. The P369 set costs $13.50 less, but it is not a substitute for the Singer-focused hardware set.
Compact comparison
| Product | Listed price | Package focus |
|---|---|---|
| Bobbins and Sewing Machine Shuttle Case for Singer Treadle Machines, 11 Pcs Set | USD 32.99 | 10 bobbins plus 1 shuttle bobbin case |
| P369 Bead & Sequin Presser Foot Set | USD 19.49 | Three P369 presser feet for decorative stitching |
Where each product wins
- Singer Treadle machine hardware: The bobbin-and-shuttle set is the clear fit because its title names Singer Treadle Machines and its package combines both types of hardware.
- Bead and sequin decoration: The P369 set wins for projects involving decorative details, since its title and use case are centered on a special presser foot rather than bobbin supplies.
- Price-conscious specialty work: The P369 set has the lower listed price, with a $13.50 spread between the two choices.
Product notes
Bobbins and Sewing Machine Shuttle Case for Singer Treadle Machines, 11 Pcs Set
For a Singer Treadle Machines setup that needs the hardware named in the title, this set is the direct match: it combines 10 bobbins with one shuttle bobbin case. The listed measurements-33.2 mm for the bobbins and 48.8 mm for the case-give the set a defined format, while the attributes list a new condition and 1.76-ounce weight. At USD 32.99, it is the higher-priced choice in this comparison, with a $13.50 gap over the P369 set. That price is the main limitation when a project only calls for a presser foot. It is also centered on bobbin and shuttle hardware, so bead- or sequin-focused work points elsewhere. Choose it for the named Singer Treadle Machines use case, not as a decorative-foot substitute.
P369 Bead & Sequin Presser Foot Set
For decorative sewing that uses beads or sequins, the P369 set has the clearer brief. It includes three P369 presser feet and is intended to guide decorative details through fabrics such as wedding-dress material, eveningwear, lace, tulle, and silk. The polished-steel construction and help with reducing thread snagging give shoppers concrete reasons to choose it for specialty stitching. At USD 19.49, it is the lower-priced pick and sits $13.50 below the bobbin-and-shuttle set. Its limitation is scope: the listed package is three presser feet, so it does not address a Singer Treadle bobbin-and-shuttle need. Choose it when the project is decorative footwork; choose the other set for the hardware job.
Final choice by use case
- Replacing or adding bobbins and a shuttle case for Singer Treadle Machines: Choose Bobbins and Sewing Machine Shuttle Case for Singer Treadle Machines, 11 Pcs Set.
- Guiding beads or sequins through decorative fabrics: Choose 3Pcs P369 New Bead Sequin Special Presser Foot.
- Choosing by price for specialty presser-foot work: The P369 set is the straightforward pick because its listed price is lower and its package is purpose-built around decorative footwork.
The package counts should not decide this comparison on their own: 11 pieces describes a bobbin-and-shuttle grouping, while three pieces describe a set of specialized presser feet. Match the set to the sewing task first.
